Electrical Manufacturing Engineer, Supplier Operations (Medical Device)
Cala Health
Summary
We are seeking a hands-on Electrical Manufacturing Engineer to serve as Cala's on-site technical lead at our contract manufacturer in Watertown, South Dakota. This role focuses on keeping production running smoothly, resolving test failures, improving test and manufacturing processes, and driving yield improvement for our wearable medical devices.
Job description
The Opportunity
We are seeking a hands-on Electrical Manufacturing Engineer to serve as Cala's on-site technical lead at our contract manufacturer in Watertown, South Dakota. This role focuses on keeping production running smoothly, resolving test failures, improving test and manufacturing processes, and driving yield improvement for our wearable medical devices.
A Day in the Life
- Production Support: Be on site at the contract manufacturer during production builds, understanding day-to-day production issues first-hand, as well as supporting process improvements and line optimization.
- Line Readiness: Get ahead of anything that could stop a build, including component supply and shortages, build paperwork (work instructions, travelers, and device history records), equipment and fixture readiness, and operator training.
- Test Failure Root Cause Analysis: Lead root-cause investigations across electrical, mechanical, software, and process issues; verify corrective actions and feed manufacturability, assembly, and test results back into the design.
- Test Improvement: Improve production test coverage, fixtures, and methods to catch defects earlier, reduce false failures, and shorten test time. Support test method validation and related documentation.
- Automated Data Collection: Develop a robust software platform that models and tracks the manufacturing process, tracks tests on the line, and ensures the quality and performance of each and every product produced.
- Process & Yield Improvement: Develop and improve manufacturing and test processes to increase yield, reduce cycle time, lower scrap, and rely less on operator tribal knowledge. Identify opportunities for automation or semi-automation.
- Process Validation & Documentation: Assist with process validation (IQ/OQ/PQ) and partner with the contract manufacturer to document and roll out new tooling, processes, and work instructions. Support NPI and production ramp activities, including design transfer.
- Quality Compliance: Support the identification, documentation, and resolution of quality issues within Cala's and the contract manufacturer's quality systems, including NCMRs, CAPAs, and engineering change orders (ECOs).
- Dock-to-Stock: Work with the contract manufacturer to establish the process controls, test confidence, and quality data needed to qualify them as a full dock-to-stock supplier, eliminating incoming testing at HQ.
- HQ Liaison: Serve as HQ's eyes and ears at the contract manufacturer. Provide regular build status, yield data, and early escalation of risks to Cala's Operations, Quality, and Engineering teams.
Skills and Experience
- Manufacturing & Test Experience: 5+ years in manufacturing, test, or manufacturing engineering for electronic or electromechanical products (medical device preferred).
- Experience with test instrumentation, data acquisition, and scripting or programming, such as Python, to develop or improve production test systems.
- Electrical Troubleshooting: Hands-on board- and system-level debugging. Comfortable reading schematics and layouts and using oscilloscopes, DMMs, power supplies, and electronic loads to isolate failures.
- Working knowledge of PCBA processes (SMT, reflow, rework) and common defect modes.
- Production Test: Experience with functional and end-of-line test, ICT or flying probe, and the design or improvement of test fixtures and test software.
- Firmware & Mechanical Breadth: Comfortable loading and troubleshooting firmware, interpreting test logs, and diagnosing mechanical issues in small electromechanical assemblies (plastics, bonding, sealing).
- Contract Manufacturing: Experience working directly with contract manufacturers, ideally as the on-site representative of the product owner.
- Medical Device Quality: Familiarity with medical device design and quality controls in a regulated environment (ISO 13485, FDA QMSR / 21 CFR 820), including NCMRs, CAPAs, process validation (IQ/OQ/PQ), and change control.
- Process Improvement: Experience applying root cause analysis tools (8D, 5 Whys, fishbone), PFMEA, SPC, and DOE to improve yield and process stability.
- Ownership & Communication: Strong problem-solving skills and comfort working on the factory floor. Self-directed and able to operate independently away from HQ. Clear communicator who works well across engineering, quality, operations, and supplier teams.
- Education: BS or MS in Electrical Engineering or a related technical field.
Location and Travel Expectations
Location: Living in or near Watertown, SD is strongly preferred. Candidates based in the Minneapolis, MN area or near Cala's headquarters in San Mateo, CA will also be considered. On-site Requirement: Ready availability and frequent on site presence at our contract manufacturer in Watertown, SD during production builds. Travel: Candidates based outside Watertown should expect regular, recurring travel to Watertown to meet the on-site requirement. Occasional travel to Cala HQ in San Mateo, CA may also be required.
Requirements
- 5+ years in manufacturing, test, or manufacturing engineering for electronic or electromechanical products
- Experience with test instrumentation, data acquisition, and scripting or programming such as Python
- Hands-on board- and system-level electrical debugging
- Comfortable reading schematics and layouts and using oscilloscopes, DMMs, power supplies, and electronic loads
- Working knowledge of PCBA processes (SMT, reflow, rework) and common defect modes
- Experience with functional and end-of-line test, ICT or flying probe, and test fixture/test software design
- Comfortable loading and troubleshooting firmware and interpreting test logs
- Diagnosing mechanical issues in small electromechanical assemblies
- Experience working directly with contract manufacturers
- Familiarity with ISO 13485, FDA QMSR / 21 CFR 820, NCMRs, CAPAs, process validation (IQ/OQ/PQ), and change control
- Experience applying root cause analysis tools (8D, 5 Whys, fishbone), PFMEA, SPC, and DOE
- Strong problem-solving skills and comfort working on the factory floor
- Self-directed and able to operate independently away from HQ
- Clear communicator across engineering, quality, operations, and supplier teams
- BS or MS in Electrical Engineering or a related technical field
- Authorized to work in the United States on a full-time basis
Company overview
Cala Health is a pioneering bioelectronic medicine company that is transforming the standard of care for chronic neurological conditions through innovative wearable neuromodulation therapies. Founded in 2014 and headquartered in San Mateo, California, the company merges cutting-edge neuroscience with advanced technology to deliver individualized peripheral nerve stimulation. Cala Health's flagship product, the Cala kIQ™ System, is the only FDA-cleared wearable device that provides effective therapy for action hand tremors in patients with essential tremor and Parkinson's disease. The system utilizes Transcutaneous Afferent Patterned Stimulation (TAPS) therapy, which measures each patient's unique tremor physiology and delivers personalized stimulation patterns for meaningful tremor relief. Beyond its current indications, Cala Health is actively developing new therapies in neurology, cardiology, and psychiatry, positioning itself as a leader in the rapidly evolving field of bioelectronic medicine. The company operates a direct-to-home digital durable medical equipment platform that reshapes prescription therapy delivery and has secured coverage with major health plans and the Veterans Affairs Health System.