Production Welder T - 1st Shift
Ipsen
Summary
Learns all activities required to effectively lay out work, set-up appropriate equipment to meet or exceed fabrication, assembly, and customer requirements per specifications and published schedules. Begins the qualification process in all welding disciplines. Learns to efficiently utilize resources to minimize scrap, materials, and labor.
Job description
Essential Duties and Responsibilities
- Strictly adhere to published company I.S.O. guidelines and procedures
- Maintain and turn in accurate daily labor reports
- Strictly adhere to published Company safety guidelines and procedures
- Supply own hand tools per published list
- Become familiar with operational aspects of all assigned equipment, especially safety aspects such as lockout/tagout and confined space entry
- Become familiar with and gain operational understanding of all assigned equipment procedures, capabilities, and capacities
- Begin qualification process in Mig, Arc, and Oxy-acetylene equipment set-ups, including applicable adjustments
- Set-up, adjust, and operate portable cutting equipment such as oxy-acetylene torches
- Read, interpret, and process orders using standard documentation such as blueprints, sketches, set-up sheets, bills of materials, cut lists, and routings
- Understand welding symbols and their applications as indicated on blueprints
- Work with close tolerances
- Verify raw or processed materials according to type, gauge, sizing, or dimension
- Understand stock locations and store excess material properly and in a timely manner
- Use common measuring devices applicable to the area
- Select, set-up, and adjust miscellaneous hand tools and equipment
- Plan layout, parts positioning, component fit-up, assembly sequence, and equipment necessary to complete job
- Fit-up and tack components and complex pipe assemblies per specifications
- Operate sandblasting equipment safely
- Verify proof of conformance of finished product to specifications
- Follow oral and/or written instructions
- Safely operate overhead cranes, fork trucks, hand trucks, or other equipment to move material or product
- Properly select, attach, and move materials and/or equipment with appropriate lifting devices such as chains, clevices, or straps
- Perform simple upkeep and/or cleaning of equipment
- Maintain housekeeping standards in compliance with established company policies
- Work with supervision and/or leadmen and assist others as required
Leak Check
- Set-up, program, adjust, and operate vacuum pumping systems, pump stand, portable unit, and applicable utility connections for water, power, and exhaust
- Set-up, program, adjust, and operate the helium mass spectrometer
- Calibrate the helium mass spectrometer and perform calibration daily prior to any vacuum leak testing
- Prepare for leak testing by blanking off ports, flanges, couplings, or other as required
- Perform leak-testing functions with the helium mass spectrometer while part is under vacuum or pressure
- Pressure test components with helium or air to meet specifications
- Check for leaks utilizing snoop or other specified methods
- Set-up, program, adjust, and operate hydrostatic test equipment when applicable
- Perform hydrostatic test functions when applicable
- Understand capabilities, capacities, and limitations of all equipment assigned to leak check area
Saw Operations
- Become familiar with and gain operational understanding of all assigned vertical and horizontal saws
- Understand adjustments such as tilt, guides, and stock block of various fixtures required for specific angle cuts
- Set and adjust feed rates for types of steel and blade selected
- Change blades, monitor, and add coolant as required
Requirements
- High school diploma or general education degree (G.E.D.)
- Minimum of 1-year related experience
- Ability to read, analyze, interpret, and comprehend written and/or verbal instructions
- Ability to write simple correspondence
- Ability to add, subtract, multiply, and divide in all units of measure using whole numbers, common fractions, and decimals
- Basic knowledge of geometry relative to determining angles of required cuts
- Ability to apply common sense understanding to carry out instructions in written, oral, diagram, or schedule form
- Forklift and overhead crane training and certification required
- Ability to stand, use hands, reach, talk, and hear regularly
- Ability to occasionally walk, climb, balance, stoop, kneel, or crouch
- Ability to occasionally lift and/or move up to 50 pounds
- Specific vision abilities including close, distance, color, peripheral, depth perception, and ability to adjust focus
Company overview
Ipsen is a French biopharmaceutical company headquartered in Paris, France, with a global presence in over 40 countries. Founded in 1929 by Henri Beaufour, the company has evolved into a leading mid-size pharmaceutical firm specializing in three key therapeutic areas: oncology, rare diseases, and neuroscience. With approximately 5,300 employees worldwide, Ipsen operates as a publicly traded company on Euronext Paris while maintaining significant family ownership through the Beaufour family. The company's portfolio includes innovative treatments such as Cabometyx for advanced cancers, Dysport for neurological conditions, and Bylvay for rare liver diseases. Ipsen has established itself as one of the world's top 15 biopharmaceutical companies in oncology sales, with medicines registered in 88 countries and direct commercial operations in over 30 nations. The company maintains four global R&D hubs and three pharmaceutical development centers, investing significantly in research and development to advance transformative medicines for patients with limited treatment options.